Drying Systems

Find out your best solution in Drying Systems:

XD 20 Series

X Dryers

Innovative and exclusive flexible dehumidifying system for technical polymers. Innovative because it’s not the dryer that dehumidifies the polymers, but the polymers that give the dryer all the inputs for dehumidification. Exclusive because the system management is not based on the traditional material/temperature relation.

The programming requires only two parameters to be set:

  • Material type
  • Hourly throughput

All the rest is automatic!

ANTI-STRESS system protects the polymers from processing over-time and over-temperature at the same time providing considerable energy saving.

Regeneration is compensated so that the process airflow is constant even during the regeneration phase. Performance is maximized by combining X dryers with OTX hoppers.

X Dryer is MOWIS ready.

Key Points

  • Dew Point -75 °C (-103 °F)
  • Variable airflow
  • Anti-stress system

SX 20 series

Sincro dryers

The technology used for this series of dryers is based on the X Technology: this means high performance with efficiency up to -70 °C Dew Point. The special thermodynamic design uses zeolite with low energy consumption and high throughput efficiency.

A powerful microprocessor supports the SINCRO project.

The SX dryers use solid state relays for the process and regeneration with adjustable PID temperature control, they do not use compressed air or cooling water. Master 200 completes the equipment and simplifies the user interface.

SX Sincro dryers are MOWIS ready.

Key Points

  • Dew Point -70 °C (-94 °F)
  • Anti-stress system
  • Zeolite technology

XD 800 Series

X Dryers

The XD 800 X is equipped, as standard, with an advanced colour touch-view control, which includes a built-in material database that simplifies dryer control for the operator. The intuitive screen navigation allows for a quick and easy overview of critical drying parameters including dew point and temperature.

The XD 800 X dryer represents the state of the art in drying of large quantities of pellets thanks to its multiple distinctive qualities. This includes Moretto X Technology and -80°C Dew Point, patented drying circuit based on pure zeolite absorbent and long life process cycle (up to 24 hours), an in-house designed turbo compressor and the adaptive airflow. These features combine to provide extraordinary efficiency for high throughput requirements and make the XD 800 X PET dryer version the perfect drying system for PET.

Performances are maximised combining X dryers with OTX drying hoppers.

X Dryers are MOWIS ready.

Key Points

  • Adaptive airflow
  • High efficiency turbo compressors
  • Electric and Gas heating unit available

SX 800 Series

Sincro Dryers

The SX 800 X series dryers are designed for high performance and throughput. The double bed with zeolite technology, the high efficiency turbocompressor made in Moretto result in significant energy savings. This series is provided with SINCRO control, which has equipped more than 6.000 machines worldwide in ten years.

Dryers SX 800 X are combined with high dimension 100 series hoppers with capacity up to 15.000 dm³. The hoppers are equipped with two high temperature sight-glasses and with a perfectly flush-fit wide door. The insulation is suitable for temperature up to 200 °C.

SX Sincro dryers are MOWIS ready.

Key Points

  • Dew Point -70°C (-94 °F)
  • Zeolite technology
  • Solid state relays

X MAX

Modular Dryer

X MAX has a modular design developed for large systems. With the coupling of the modules, X MAX can serve systems up to 20.000 m3/h. The X Technology increases the performance of X MAX, reducing the energy consumption to a minimum. Each unit includes a turbo compressor made in Moretto, a widespread zeolite bed and a Dew Point Control device. A local PLC with colour touchscreen display provides a simple and intuitive interface.

The X MAX units can be assembled with a minimum of 3 units and a maximum of 10 units. The variable airflow adjusts automatically according to the needs of the process, avoiding thermal stress on the polymer and changes to the viscosity. Each unit is regenerated in rotation; while one unit is in regeneration, the other units are in process simultaneously.

X MAX dryers are MOWIS ready.

X MAX together with OTX drying hoppers, FLOWMATIK airflow management system and Moisture Meter MANAGER create EUREKA PLUS the most efficient automatic drying system in the market.

Key Points

  • Constant performance
  • Maintenance on the fly
  • Extreme modularity

Information Request

Selected Product: Download leaflet:

Please insert your company name
Please insert your name and surname
Please insert your city
Please insert your country
Please insert your email
Please insert your telephone number
Please insert your message
Authorize the use of personal data
arrow-right-2 arrow-right-3 arrow-right calendar-icon calendar check checkup controllo cooling discount-2 discount dosing drying email facebook feeding-conveying google grinding guarantee item link linkedin logo_2 mail mail2 mail3 marker padlock - Copia padlock padlock__old page-arrow-left page-arrow-right page-list paperclip play plus security storage supervision systems temperature-control test time twitter-2 twitter update video-player youtube