湿度计管理器 - 湿度计

湿度计 CONTROL

在线湿度计分析器

Moisture Meter LOOP is the device dedicated to the in-line measurement of the plastic granules residual moisture, after drying process and immediately before the polymer transformation.

Moisture Meter LOOP has a Moisture Meter at the base of the hopper. When the system recognizes that the material leaving the hopper is not properly dehumidified, it starts the material recovery function. The material with a non-compliant moisture level at the base of the hopper is bring back into the hopper to guarantee a high quality production.

Moisture Meter LOOP has Ethernet connection, USB and Serial RS485. It’s MOWIS ready. The 7” colour Touch View can manage up to 6 devices.

湿度计 LOOP

在线湿度计分析器

Moisture Meter LOOP is the device dedicated to the in-line measurement of the plastic granules residual moisture, after drying process and immediately before the polymer transformation.

Moisture Meter LOOP has a Moisture Meter at the base of the hopper. When the system recognizes that the material leaving the hopper is not properly dehumidified, it starts the material recovery function. The material with a non-compliant moisture level at the base of the hopper is bring back into the hopper to guarantee a high quality production.

Moisture Meter LOOP has Ethernet connection, USB and Serial RS485. It’s MOWIS ready. The 7” colour Touch View can manage up to 6 devices.

湿度计 SENTINEL

在线湿度计分析器

Moisture Meter SENTINEL is the device dedicated to the in-line measurement of the plastic granules resi-dual moisture, after drying process and immediately before the polymer transformation.

Moisture Meter SENTINEL has a Moisture Meter at the base of the hopper. When the initial parameters have been overcome, the system starts the material recovery function until the achievement of set parameters. During this phase, it stops the regular material flow to respect the strictly quality control of medical sector.

Moisture Meter SENTINEL has Ethernet connection, USB and Serial RS485. It’s MOWIS ready. The 7” colour Touch View can manage up to 6 devices.

湿度计管理器

完美的除湿管理

湿度计管理器是聚合物在除湿干燥方面的4.0革命。没有任何工具能够像湿度计管理器那样竞争或提供具有最高能效的生产认证。

独特的“功率峰值技术”使湿度控制绝对精确。通过测量颗粒在料斗入口和出口处的初始和最终含水量之间的差值，系统可以管理干燥机的工作条件，同时最大限度地提高运行性能。

湿度计管理器将干燥机集成到智能工厂4.0项目概述的可自动调节的系统中。这种带有湿度计管理器的结构化流程在效率方面取得了惊人的成果。湿度计管理器每两秒扫描一次材料，并为每份样品提供定期的质量报告。生产是逐件认证的。该产品配有一个10英寸高清的彩色触摸屏操作界面。

湿度计管理器可连接：以太网，USB，RS485。该产品可配备MOWIS系统。

湿度计管理器与X MAX干燥机，OTX干燥料斗和FLOWMATIK气流管理系统组合，形成市场上最高效的自动除湿干燥系统EUREKA PLUS。