MOISTURE METER


MOISTURE METER CONTROL
In-line moisture analyzer
Moisture Meter CONTROL is the device dedicated to the in-line measurement of the plastic granules residual moisture, after drying process and immediately before the polymer transformation.
Moisture Meter CONTROL is based on “Power Peak” patented technology which determines the moisture inside the plastic granules by using electromagnetic waves.
- Moisture range up to 3000 ppm
- Temperature range 20-180 °C (68-356 °F)
The device is able to measure the minimum moisture level in ppm.
Moisture Meter CONTROL has Ethernet connection, USB and Serial RS485. It’s MOWIS ready. The 7” colour Touch View can manage up to 6 devices.
Wichtige Punkte
- In Linie-Messung des Feuchtigkeitsgrades
- Zertifizierte Produktion
- Angepasste Materialprofile

MOISTURE METER LOOP
Analysator der Feuchtigkeit In Linie
Moisture Meter LOOP is the device dedicated to the in-line measurement of the plastic granules residual moisture, after drying process and immediately before the polymer transformation.
Moisture Meter LOOP has a Moisture Meter at the base of the hopper. When the system recognizes that the material leaving the hopper is not properly dehumidified, it starts the material recovery function. The material with a non-compliant moisture level at the base of the hopper is bring back into the hopper to guarantee a high quality production.
Moisture Meter LOOP has Ethernet connection, USB and Serial RS485. It’s MOWIS ready. The 7” colour Touch View can manage up to 6 devices.
Wichtige Punkte
- In-line moisture control
- Certified production
- Recirculation of active monitoring

MOISTURE METER SENTINEL
Analysator der Feuchtigkeit In Linie
Moisture Meter SENTINEL is the device dedicated to the in-line measurement of the plastic granules resi-dual moisture, after drying process and immediately before the polymer transformation.
Moisture Meter SENTINEL has a Moisture Meter at the base of the hopper. When the initial parameters have been overcome, the system starts the material recovery function until the achievement of set parameters. During this phase, it stops the regular material flow to respect the strictly quality control of medical sector.
Moisture Meter SENTINEL has Ethernet connection, USB and Serial RS485. It’s MOWIS ready. The 7” colour Touch View can manage up to 6 devices.
Wichtige Punkte
- In-line moisture control
- Certified production
- Recirculation of active monitoring


MOISTURE METER MANAGER
Perfekte Trocknung-Leitung
Moisture Meter MANAGER ist die 4.0 Revolution für die Trocknung der Polymere. Kein Werkzeug kann wetteifern oder eine Produktionszertifizierung mit maximaler Energieeffizienz anbieten, wie der Moisture Meter Manager.
Die Kontrolle der Feuchtigkeit ist völlig präzise, dank der exklusiven Technologie „Power Peak“. Die Messung des Deltas zwischen die Anfangs- und Endfeuchtigkeit des Granulats im Ein- und Auslass des Trichters ermöglicht es das System die Arbeitsbedingungen des Trockners zu steuern und die Prozessleistungen zu maximieren.
Moisture Meter Manager integriert den Trockner in ein flexibles System laut des 4.0 Projekt Smart Factory. Ein solcher strukturierte Prozess, mit Moisture Meter Manager, erreicht erstaunliche Ergebnisse in Bezug auf Effizienz. Der Moisture Meter Manager scannt Ihr Material alle zwei Sekunden, liefert Ihnen Qualitätsreporte und Produktionszertifikate, und das Stück für Stück.
MM MANAGER hat eine Farbschnittstelle Touch View HD 10“.Moisture Meter MANAGER hat verschiedene Verbindungen: Ethernet, USB, Seriale RS485. Er ist MOWIS ready.
Moisture Meter MANAGER zusammen mit die Trockner X MAX , die OTX-Trichter und das Luftflußmanagementsystem FLOWMATIK macht EUREKA PLUS, das effizientesten automatischen Entfeuchtungssystem auf dem Markt.
Wichtige Punkte
- Maximale Energieeffizienz
- Zertifizierte Produktion
- Kontrolle und Leistung der Feuchtigkeit In-Linie